H2 Rise & Fall Cubicle Hinge
Last Updated: Friday 9 January 2009
Click thumbnail to enlarge
Similair to the H1,the H2 hinge does not require any specific pre-drilling and is available to suit panel thicknesses over 17mm. The hinge is fitted to the edge of the door using two 50mm screws, the fascia component is simply screwed into the back of the fascia using three standard woodscrews.
The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between.
A hidden screw is fitted to each hinge to prevent the doors from being lifted off, where immediate access is required these screws may be discarded so the door can be easily lifted off.
Supplied in a silver anodised finish or powder coated to a colour of your choice, the hinges are packed in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm). Where heavy or outward opening doors are fitted, we would advise the fitting of three or more hinges to the door.
Order Codes
0H02A H2 Hinge (Pair) SAA
0H02P H2 Hinge (Pair) PPC
You can rely on the best technical support available. Our team are here to support and guide you through any technical questions, installation advice or support. Quite simply, if you need any help, call us now.
From the UK 01325 313377
Outside the UK +44 1325 313377